ALC-H Series · ALC-H1500
ALC-H1500
9004-65-3
3912.39
Technical specification
Every value is shown with its test condition. Parameters that are set per batch are confirmed on the batch COA.
| Parameter | Value | Test condition / method |
|---|---|---|
| Chemical name | Hydroxypropyl methyl cellulose | — |
| CAS number | 9004-65-3 | — |
| HS code | 3912.39 | — Final classification per destination customs. |
| Appearance | White to off-white powder | — |
| Ionicity | Non-ionic | — |
| Substitution degree (DS / MS) | Methoxyl 19.0–24.0% / Hydroxypropyl 4.0–12.0% | Determined per production batch, USP/GB method |
| Moisture content | Max 5.0% % | Halogen moisture analyser, 105 °C |
| pH | 5.0–8.0 (1% solution, 25 °C) | 1% aqueous solution, 25 °C |
| Particle size | Min 98% through 80 mesh (180 µm) | Dry sieving, 80 mesh |
| Bulk density | 300–500 g/L g/L | Untapped, as packed |
| Gel temperature | 55–70 °C (2% solution) °C | 2% aqueous solution, heating rate 1 °C/min |
| Ash content | Max 5.0% (as sulphate) % | Muffle furnace, 800 °C |
Typical values for this grade, not a specification guarantee — the contractual figure is the one stated in the COA issued for your batch. Viscosity is measured on a 2% aqueous solution at 20 °C, Brookfield LV, 20 rpm.
How HPMC works in a mortar is the same across grades — see the HPMC category page for the water-retention, anti-sag, open-time and film-forming mechanisms behind every grade. What changes with viscosity is the number and the application band, and those are on this page.
Applications
ALC-H1500 is used in the following systems — High-build putty, Plaster (thick coat), Wall putty (single-coat). Which viscosity band suits which system is set out in the application-and-viscosity table on the HPMC category page .
A grade that is wrong for the system costs more than the price difference between two grades. Tell us the system and we will tell you if this one is a poor fit.
Batch consistency, export documents and response time do not change with viscosity grade — they are set out under six things procurement can verify on the home page.
Sample, packaging & storage
200 g free of charge, shipped from stock. Dispatch arrangements are set out in the sample confirmation.
Store sealed and dry, below 35 °C, away from direct sunlight. Shelf life: 24 months from production date in the unopened original packaging. MOQ 1 metric ton per grade.
Downloads
FAQ
Batches typically measure between 135,000 and 180,000 mPa·s against a nominal 150,000 — that is −10% to +20% of nominal. The spread comes from the test method, the test conditions and the instrument, not from a drifting process. The contractual figure is the one stated on the batch COA, measured at 2% aqueous solution and 20 °C.
When the coat is thick, the substrate thirsty or the climate hot. High-build putty applied in one pass, plaster on very absorbent masonry, and work in hot, dry conditions all draw water faster than a 100,000 band can conveniently hold, and the higher band retains more per gram. If your coats are thin and sanded between passes, the extra band is cost without benefit.
They need more care in dispersion, not more effort overall. Add the powder to water under shear and let it hydrate before adding the binder; dumping it into a dry blend and flooding the mixer is what causes lumps. The delayed-solubility behaviour of this grade helps — the particles disperse before they start to build viscosity.
Start at 0.15 – 0.30% of binder weight and treat that as a starting point, not a recommendation. Sag resistance improves as dosage rises, but so does mixing difficulty, and local filler grading moves the optimum. Lock the figure only after a trial on your own materials and at your working temperature.
Get a Quote
Tell us the application and the monthly volume and we reply with price, MOQ, packing and lead time in one message. Reply within 12 working hours.
Tell us your application and volume — we reply within 12 working hours.
ALC-H1500