ALC-H Series · ALC-H40C
ALC-H40C
9004-65-3
3912.39
Technical specification
Every value is shown with its test condition. Parameters that are set per batch are confirmed on the batch COA.
| Parameter | Value | Test condition / method |
|---|---|---|
| Chemical name | Hydroxypropyl methyl cellulose | — |
| CAS number | 9004-65-3 | — |
| HS code | 3912.39 | — Final classification per destination customs. |
| Appearance | White to off-white powder | — |
| Ionicity | Non-ionic | — |
| Substitution degree (DS / MS) | Methoxyl 19.0–24.0% / Hydroxypropyl 4.0–12.0% | Determined per production batch, USP/GB method |
| Moisture content | Max 5.0% % | Halogen moisture analyser, 105 °C |
| pH | 5.0–8.0 (1% solution, 25 °C) | 1% aqueous solution, 25 °C |
| Particle size | Min 98% through 80 mesh (180 µm) | Dry sieving, 80 mesh |
| Bulk density | 300–500 g/L g/L | Untapped, as packed |
| Gel temperature | 55–70 °C (2% solution) °C | 2% aqueous solution, heating rate 1 °C/min |
| Ash content | Max 5.0% (as sulphate) % | Muffle furnace, 800 °C |
Typical values for this grade, not a specification guarantee — the contractual figure is the one stated in the COA issued for your batch. Viscosity is measured on a 2% aqueous solution at 20 °C, Brookfield LV, 20 rpm.
How HPMC works in a mortar is the same across grades — see the HPMC category page for the water-retention, anti-sag, open-time and film-forming mechanisms behind every grade. What changes with viscosity is the number and the application band, and those are on this page.
Applications
ALC-H40C is used in the following systems — Tile adhesive (C1), Joint filler, Skim coat. Which viscosity band suits which system is set out in the application-and-viscosity table on the HPMC category page .
A grade that is wrong for the system costs more than the price difference between two grades. Tell us the system and we will tell you if this one is a poor fit.
Batch consistency, export documents and response time do not change with viscosity grade — they are set out under six things procurement can verify on the home page.
Sample, packaging & storage
200 g free of charge, shipped from stock. Dispatch arrangements are set out in the sample confirmation.
Store sealed and dry, below 35 °C, away from direct sunlight. Shelf life: 24 months from production date in the unopened original packaging. MOQ 1 metric ton per grade.
Downloads
FAQ
The C suffix marks a tile-adhesive grade. ALC-H codes are built as ALC-H plus the nominal viscosity divided by 100, then an optional suffix: C for ceramic tile adhesive, I for instant (surface-treated) grades, and no suffix for standard delayed-solubility grades. So ALC-H40C reads as the 4,000 mPa·s tile-adhesive grade of the series.
Batches typically measure between 3,600 and 4,800 mPa·s against a nominal 4,000 — that is −10% to +20% of nominal. The spread comes from the test method, the test conditions and the instrument, not from a drifting process. The contractual figure is the one stated on the batch COA, measured at 2% aqueous solution and 20 °C.
Start with ALC-H100C. The slip and tensile requirements of C2 are easier to meet from the 10,000 mPa·s band, while ALC-H40C is the economical choice for plain C1 adhesives and joint fillers. If your sand is well graded and the climate mild, ALC-H40C can still pass C2 — but that has to be proven on a trial, not assumed.
Start at 0.20 – 0.40% of binder weight and adjust against your own sand, because clay and silt consume part of the water-retention capacity. Raising the dosage cannot fix poor sand beyond a point; the correct fix is usually a different viscosity band or a cleaner sand source. Confirm the final figure on a plant trial before production.
Get a Quote
Tell us the application and the monthly volume and we reply with price, MOQ, packing and lead time in one message. Reply within 12 working hours.
Tell us your application and volume — we reply within 12 working hours.
ALC-H40C