ALC-H Series · ALC-H200
ALC-H200
9004-65-3
3912.39
Technical specification
Every value is shown with its test condition. Parameters that are set per batch are confirmed on the batch COA.
| Parameter | Value | Test condition / method |
|---|---|---|
| Chemical name | Hydroxypropyl methyl cellulose | — |
| CAS number | 9004-65-3 | — |
| HS code | 3912.39 | — Final classification per destination customs. |
| Appearance | White to off-white powder | — |
| Ionicity | Non-ionic | — |
| Substitution degree (DS / MS) | Methoxyl 19.0–24.0% / Hydroxypropyl 4.0–12.0% | Determined per production batch, USP/GB method |
| Moisture content | Max 5.0% % | Halogen moisture analyser, 105 °C |
| pH | 5.0–8.0 (1% solution, 25 °C) | 1% aqueous solution, 25 °C |
| Particle size | Min 98% through 80 mesh (180 µm) | Dry sieving, 80 mesh |
| Bulk density | 300–500 g/L g/L | Untapped, as packed |
| Gel temperature | 55–70 °C (2% solution) °C | 2% aqueous solution, heating rate 1 °C/min |
| Ash content | Max 5.0% (as sulphate) % | Muffle furnace, 800 °C |
Typical values for this grade, not a specification guarantee — the contractual figure is the one stated in the COA issued for your batch. Viscosity is measured on a 2% aqueous solution at 20 °C, Brookfield LV, 20 rpm.
How HPMC works in a mortar is the same across grades — see the HPMC category page for the water-retention, anti-sag, open-time and film-forming mechanisms behind every grade. What changes with viscosity is the number and the application band, and those are on this page.
Applications
ALC-H200 is used in the following systems — Wall putty, EIFS base coat, Render (hand-applied). Which viscosity band suits which system is set out in the application-and-viscosity table on the HPMC category page .
A grade that is wrong for the system costs more than the price difference between two grades. Tell us the system and we will tell you if this one is a poor fit.
Batch consistency, export documents and response time do not change with viscosity grade — they are set out under six things procurement can verify on the home page.
Sample, packaging & storage
200 g free of charge, shipped from stock. Dispatch arrangements are set out in the sample confirmation.
Store sealed and dry, below 35 °C, away from direct sunlight. Shelf life: 24 months from production date in the unopened original packaging. MOQ 1 metric ton per grade.
Downloads
FAQ
Batches typically measure between 18,000 and 24,000 mPa·s against a nominal 20,000 — that is −10% to +20% of nominal. The spread comes from the test method, the test conditions and the instrument, not from a drifting process. The contractual figure is the one stated on the batch COA, measured at 2% aqueous solution and 20 °C.
Its position in the band. At 20,000 mPa·s the grade has enough yield stress to stop a putty or a base coat from sagging, but still spreads and sands like a working material. That lets one inventory item cover putty, render and EIFS base coat — useful when storage and working capital matter more than squeezing the last percent of performance per application.
Hand-applied render: ALC-H200. Machine-applied render and premium tile adhesive: ALC-H500C. The pump and the spray head add shear that a hand trowel does not, and the higher band keeps the sprayed material on the wall instead of sliding. If you spray but still want one grade, dose ALC-H200 at the top of its range and test slip before committing.
Yes. The 20,000 mPa·s band sits inside the C1 window and is a common choice when one grade has to serve adhesive, putty and render lines at once. It is not tuned for adhesive the way the C-suffixed grades are, so treat the dosage as a fresh starting point and confirm slip and open time on your own sand before production.
Get a Quote
Tell us the application and the monthly volume and we reply with price, MOQ, packing and lead time in one message. Reply within 12 working hours.
Tell us your application and volume — we reply within 12 working hours.
ALC-H200